0800 161 56760800 161 5676

Euro Cash Register Ltd Unit 5 Bramery Business Park, Alstone Lane, Cheltenham, Gloucestershire, GL51 8HE, United Kingdom.

My Cart

Items:  items
Value: 

Order before 3pm for NEXT Working Day Delivery.

Casio SE-S3000 Error numbers and cures

ERROR E 08 - How to rectify

If the display is showing error E 08 then you need to sign on a clerk.

You have a few ways of doing this, it is dependant on a few factors e.g. whether you have passcodes or you have programmed this by accident.

Step 1. This usually works ok:

1. press number 1 on keyboard (this is the large numbers, NOT departments 1-25)
2. press CLK# button

At this stage you should see the display has changed and you are ready to process a sale.

Step 2. - Passcodes are setup

1. enter your passcode on the numeric buttons
2. press the CLK# button

At this stage you should see the display has changed and you are ready to process a sale.

Step 3. - Incorrect programming has been setup.

1. press the CLK # buuton

You might see that C01 or C02 is on the screen, if so you have accidently programmed the clerk button to be setup with a number.

to cure:

1. press the clerk button once
2. turn key to program
3. press clerk button again
4. arrow down to system settings
5. press cash/ tend
6. press 3 then subtotal
7. press zero
8. press clerk button
9. press subtotal

turn key back to reg and the npress number 1 then clerk


ERROR E 10 - How to rectify

If the display is showing error E 10 then the printer has no paper inside or has run out.

Replace the paper then press the C button ( clear)

If you need more help, please call our engineer on 01570 480 932 and quote your Invoice number.

ERROR E 035 - How to rectify

If the error number is on the display right now, then press ERROR/CANCEL button.

1. Key to program
2. press arrow down to "system settings"
3. press ca/amt tend
4. press 3 then subtotal
5. type in 0000100000 then press ca/amt tend button
6. press subtotal to exit

now turn key to REG and test.

ERROR E 037 - How to rectify

If the error number is on the display right now, then press C button, then press CH button and the drawer should open.

1. Key to program
2. press arrow down to "system settings"
3. press ca/amt tend
4. press 3 then subtotal
5. type in 0000100000 then press ca/amt tend button
6. press subtotal to exit

now turn key to REG and test.

Condiment error

If you have the error where the machine is asking for a condiment, please do following:

1. Key to program
2. press arrow down to "system settings"
3. press ca/amt tend
4. press 3 then subtotal
5. type in 0 then press each department button
6. press subtotal to exit

now turn key to REG and test.

Recently Viewed